SIG Sauer 556 Arms Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
47 Posts
Discussion Starter · #1 ·
What are the options for a Sig 556 M4 style owner regarding replacing the plastic folding stock? What is everyone finding that works the best? Some recommend Ace. I want to keep the M4 look. Please help.
 

·
Registered
Joined
·
105 Posts
m4 look

I would get the original sig side folding assembly that is available through cogunsales. it is the isreali made product that sig was selling on the sig 556 rifles with the m4 collapsible and side folding stock. cogunsales also sells the original sig m4 style stock to add to the side folding assembly. I just found a stock, on ebay, and a member here in the forum for the side folding assembly... in my opinion it fits good and was made for it if you dont have the sig 556 classic receiver.

Someone might see your post and private message you for what you are looking for. good luck,
 

·
Registered
Joined
·
1,394 Posts
Magpul CTR is the way to go for adjustable with a metal stock tube. Any M4 style will be the same feel.
 

·
Registered
Joined
·
105 Posts
m4 style stock

siggggglover said:
jnathanj33,

Is the factory folding stock, the Israeli stock you are mentioning?
Yes, it is the original one from sig sauer.
 

·
Registered
Joined
·
403 Posts
Uhhh... Magpul UBR or the CTR with metal tube. If you want it to fold, use ACE Ltd. To make it fold on either. Not cheap, but Solid as you requested.
 

·
Registered
Joined
·
24 Posts
metal tube w/ CTR

Can you order a metal tube from Magpul for the particular stock you purchase? And should I get the Mil-spec model or the commercial...thanx
 

·
Registered
Joined
·
403 Posts
Re: metal tube w/ CTR

lcsig556 said:
Can you order a metal tube from Magpul for the particular stock you purchase? And should I get the Mil-spec model or the commercial...thanx
If you are getting the CTR, I would go Mil-Spec, And I believe they do sell them. If you use the UBR, it has it's own tube and is included.
 

·
Registered
Joined
·
24 Posts
Re: metal tube w/ CTR

flascot007 said:
lcsig556 said:
Can you order a metal tube from Magpul for the particular stock you purchase? And should I get the Mil-spec model or the commercial...thanx
If you are getting the CTR, I would go Mil-Spec, And I believe they do sell them. If you use the UBR, it has it's own tube and is included.
Thanks for your help I will do just that
 
1 - 9 of 9 Posts
Top