SIG Sauer 556 Arms Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
186 Posts
Discussion Starter #1
Done with the modding & happy with it now :D

These are the things I changed/added.
Magpul CTR
ACE folder
Magpul MOE grip (not a fun mod)
Midwest Industries BUIS front & back
KNS hooded duplex front sight
KNS push button pivot pin
Griffin charging handle
Leupold Mark 4 1.5x - 5x Illuminated SPR
LaRue LT-104
551 style handguards
cheap single point sling attachment point
Vortex flash hider

Really happy with it now. I like this scope & mount.








 

·
Registered
Joined
·
44 Posts
Very nice. I ordered my LT-104 and MI SIG556 today. I hope to have the scope in by the time they arrive. After seeing these pics I'm looking forward to getting it setup.
 

·
Registered
Joined
·
186 Posts
Discussion Starter #4
antonyasphalter said:
Your rifle looks great, one question though =
Is the photo of the sight picture, at what power?
Thanks...

That picture is at 1.5x.

Other people have said that it can be used with both eyes open at 1.5x... I would agree. It's only slightly magnified. Very close to a red dot.

One other thing... the clarity is incredible. I have a Leupold VX-II 3-9x40mm & this Mark 4 is really that much better.

You defiantly get what you pay for.
 

·
Registered
Joined
·
421 Posts
Very nice but I guess I'll have to be the guy that says, if you're not firing, put it on safe.
 

·
Registered
Joined
·
438 Posts
a80ndrn8 said:
antonyasphalter said:
Your rifle looks great, one question though =
Is the photo of the sight picture, at what power?
Thanks...

That picture is at 1.5x.

Other people have said that it can be used with both eyes open at 1.5x... I would agree. It's only slightly magnified. Very close to a red dot.

One other thing... the clarity is incredible. I have a Leupold VX-II 3-9x40mm & this Mark 4 is really that much better.

You defiantly get what you pay for.
Looks like you got it set up pretty nice.

How is the cheek weld with the height of the scope mount. Any discomfort? Have you considered adding a cheek piece to the stock?
 

·
Registered
Joined
·
71 Posts
I have that same scope and mount set-up on my 556 and really like it. I think it is a great combination to give you close quarters and longer range capability.

Am I the only one who noticed the front flip cover is on upside down?
 

·
Registered
Joined
·
27 Posts
KB-

I run my front covers the same way...It seems to block less view..and catch on stuff less at work... But thats just me. I haven't found any ill effects of doing it that way so far...
 

·
Registered
Joined
·
186 Posts
Discussion Starter #9
slewfoot said:
How is the cheek weld with the height of the scope mount. Any discomfort? Have you considered adding a cheek piece to the stock?
Don't have any range time with the new setup yet. But I've adjusted the ACE folder has high as it will go. If you look closely you can see that the stock tube is higher than where it connects to the receiver . I have thought about a 1/4 in riser for the CTR, but it's seems to line up correctly for now. Feels comfortable & natural too me.
 

·
Registered
Joined
·
3 Posts
Where did you get the KNS pins from?
 

·
Registered
Joined
·
112 Posts
Do you have a walk through of the MOE Pistol Grip mod?
 
1 - 14 of 14 Posts
Top