they have 551 handgaurds and several other sig parts just givr them an email
www.gunfactory.ch
www.gunfactory.ch
gun factory
1 - 14 of 14 Posts
This is the URL for the inner frame that has the Sig 551 parts, if you don't know German and can't navigate your way there. I lived in Germany for 11 years so Ich kann genug Deutsch sprechen to get there. ;-)
http://www.gunfactory.ch/langwaf/accstgw90zwei.htm
http://www.gunfactory.ch/langwaf/accstgw90zwei.htm
Joined
·
2 Posts
Quad Rail
Try this www.dsarms.com The do a search for the 551 rail. Good luck. Side note: Have spoke to Krieger and SIG and neither have immediate plans to offer additional barrels to allow for a suppression system. If anyone know that can produce such a barrel please chime in.
Out.
Try this www.dsarms.com The do a search for the 551 rail. Good luck. Side note: Have spoke to Krieger and SIG and neither have immediate plans to offer additional barrels to allow for a suppression system. If anyone know that can produce such a barrel please chime in.
Out.
3rd Party Barrel
I went through this when I had an AR-18 and wanted an integral suppressor setup. A guy in St. Louis name Pete Fleis was working on the AR-18/180 at the time and could spin up whatever you wanted for a barrel.
This barrel doesn't look much different.
I can't imagine that somone on the ARFCOM boards wouldn't be able to gin up whatever you wanted.
I'm looking at a custom barrel but I'm a nutcase about wanting a chrome lined barrel or readily available replacements.
The factory 1-7" hammer forged barrel is cool for 99.9% of anyone using it and I certainly fit squarely in that category most of the time but I would also like a 1-12" barrel.
I went through this when I had an AR-18 and wanted an integral suppressor setup. A guy in St. Louis name Pete Fleis was working on the AR-18/180 at the time and could spin up whatever you wanted for a barrel.
This barrel doesn't look much different.
I can't imagine that somone on the ARFCOM boards wouldn't be able to gin up whatever you wanted.
I'm looking at a custom barrel but I'm a nutcase about wanting a chrome lined barrel or readily available replacements.
The factory 1-7" hammer forged barrel is cool for 99.9% of anyone using it and I certainly fit squarely in that category most of the time but I would also like a 1-12" barrel.
Joined
·
105 Posts
german website- sig stock wanted
I want to buy this stock (sig 550/553 black side folding). could I get some help, thanksGeoJAP said:
Joined
·
692 Posts
Try Compass Lake Engineering in Florida. They make some of the top match AR barrels by buying Krieger blanks, then cutting the external profile. They might be willing to program a custom outer profile for a SIG (especially if you can supply the drawings), so a suppressor thread would be integral.
Art
Art
Re: german website- sig stock wanted
... email Rolf Schaufelberger at [email protected]
http://www.gunfactory.ch/langwaf/accstgw90zwei.htm
https://www.gunfactory.ch/div/kontakt_infos.htm
...click on Verkaufsleiter...
...send them an e-mail...or you can call them or fax...they speak English...your best bet would be to address it to Rolf...jnathanj33 said:
... email Rolf Schaufelberger at [email protected]
http://www.gunfactory.ch/langwaf/accstgw90zwei.htm
https://www.gunfactory.ch/div/kontakt_infos.htm
...click on Verkaufsleiter...
Joined
·
105 Posts
Re: german website- sig stock wanted
Thanks for the help, will do.ullie said:
I have purchased from them on many occasions. I used email to contact them indicating what I want and ask for a price in US dollars including shipping to my door.
My first few orders, I paid in money orders. That process took longer than I wished. Rolf suggested Pay Pal. Using Pay Pal, my orders usually arrived in less than a week. If you tell Rolf you want to use Pay Pal, he will email you instructions.
To avoid confusion, I would copy and paste the description of the part from their web site in my email. Using this method, I've never had to return an unwanted part.
My first few orders, I paid in money orders. That process took longer than I wished. Rolf suggested Pay Pal. Using Pay Pal, my orders usually arrived in less than a week. If you tell Rolf you want to use Pay Pal, he will email you instructions.
To avoid confusion, I would copy and paste the description of the part from their web site in my email. Using this method, I've never had to return an unwanted part.
Joined
·
105 Posts
Thank you very much for the information...slewfoot said:
Joined
·
42 Posts
We have most parts for SIG 550/551/553 in stock in the U.S.
Hello just wanted to inform you that we have most parts in stock and the new Swiss stocks are priced lower than in Switzerland and are here in the U.S available for immediate shipping.
https://www.cogunsales.com/index.php?pa ... t&Itemid=1
https://www.cogunsales.com/index.php?op ... itstart=60
Hello just wanted to inform you that we have most parts in stock and the new Swiss stocks are priced lower than in Switzerland and are here in the U.S available for immediate shipping.
https://www.cogunsales.com/index.php?pa ... t&Itemid=1
https://www.cogunsales.com/index.php?op ... itstart=60
Joined
·
105 Posts
http://www.gunfactory.ch/langwaf/accstgw90zwei.htm
That ergo pistol grip thats 4th down sure does look nice, but im guessing 229 CHF is more than i want to spend.
That ergo pistol grip thats 4th down sure does look nice, but im guessing 229 CHF is more than i want to spend.
Joined
·
105 Posts
grips
yes, too much for me now too.... approx. 209 usd
yes, too much for me now too.... approx. 209 usd
Joined
·
41 Posts
Thats a Nill grip. Its actually made from Walnut and only fits the PE90/550 series of rifles. I just got one for mt PE90 and its much larger than stock and seems to change the LOP a bit. I like it though.
![]()
1 - 14 of 14 Posts
